BMW on the lift with Eisenmann exhaust system, view from below
Exhaust systems

Tailor-made
exhaust systems.

Every system is matched to engine, vehicle and intended use – developed in Hemmingen and built by hand.

HandcraftedIn our manufactory in Hemmingen
Street legale.g. with EC type approval or ABE
High-grade stainless steelSelected to suit the temperature load
Valved exhaustQuiet day to day, loud at the push of a button
Product types

Three lines.
One standard.

From downpipe to exhaust tip: everything that shapes the sound of your car is made by us.

Eisenmann rear muffler with carbon fiber exhaust tips under the rear diffuser
01

Rear mufflers

The heart of the sound. With or without valve – as a street legal Sport version or as a Race version.

  • With or without valve control
  • Sport and Race versions
  • A choice of exhaust tip designs
View in shop
Mid pipes and X-pipe of an Eisenmann exhaust system on the underbody
02

Mid pipes

Defines the character of the sound – as a street legal Sport version or as a Race variant.

  • Street legal Sport versions
  • Race variants, e.g. sound pipe or X-pipe
  • Matched to the rear muffler
View in shop
Two Eisenmann stainless steel downpipes
03

Downpipes & headers

Made to fit from stainless steel – designed for power and torque.

  • Made to fit the available space
  • Made from stainless steel
View in shop
Model page

Everything for the
BMW M2 G87.

Valved rear muffler with ECE type approval, race parts for the center section and four exhaust tip finishes – everything for the M2 G87 on one page.

Types of approval

Loud. And fully approved.

Depending on product and vehicle, one of six types of approval applies – from no registration required to race only.

  1. ECE01No registration requiredECE type approval. Recognized internationally, no registration required.
  2. EC02No registration requiredEC type approval. Valid across the EU, no registration required.
  3. ABE03No registration requiredGerman national type approval (ABE). The ABE document stays in the vehicle.
  4. Parts certificate04Registration requiredParts certificate (Teilegutachten). Inspection by a testing organization, then entry in the vehicle documents.
  5. Individual approval05Registration requiredIndividual approval (Einzelabnahme). The vehicle is inspected by an authorized expert.
  6. Race06Not street legalFor export and motorsport – not for use on public roads.
Exhaust tips

The tips have
the last word.

Straight cut in Signature Design, slash cut in LeMans Design or Signature Sidecut – the right tips for every car, in many shapes and finishes.

Polished Eisenmann stainless steel exhaust tips
Polished stainless steelThe classic – bright and timeless.
Black exhaust tips on a blue BMW
Black anodized aluminumUnderstated and sporty.
Eisenmann exhaust tips with carbon fiber sleeves
CarbonLight, with a motorsport feel.
FAQ

Good questions.
Straight answers.

What customers ask us most – about approval, sound and manufacturing. Your question isn’t here? Give us a call or send us a message.

Is an Eisenmann exhaust system street legal?

Yes – our Sport versions come with approval. Depending on the product and vehicle, e.g. with EC or ECE type approval, German national type approval (ABE), a parts certificate (Teilegutachten) or an individual approval (Einzelabnahme). Race versions are intended for export and motorsport and are not for use on public roads. You’ll find the approval that applies to your system on the product page in our shop – or just ask us.

Does the system have to be entered in the vehicle documents?

That depends on the type of approval. With EC or ECE type approval, no entry is required; the ABE document stays in the vehicle. With a parts certificate, a testing organization inspects the system and it is then entered in the vehicle documents. With an individual approval, an authorized expert inspects your vehicle.

Lost your approval documents or bought a used system – what now?

No problem. If your approval documents (Gutachten) have been lost or you bought a used Eisenmann system, we can provide the documents again after a check, for a small fee. Just get in touch with the details of your vehicle and system.

Are Eisenmann systems approved in Switzerland?

In most cases, yes. For approval in Switzerland, however, a Swiss supplementary sheet (Beiblatt) has to be supplied with the system. Our official Swiss dealers take care of this. So if approval matters to you, it’s best to buy your system directly through one of our Swiss dealers – they handle everything for you without any problems.

What does valved exhaust technology do?

Quiet day to day, loud at the push of a button: the valves let you adapt the sound to the situation. Our rear mufflers are available with or without valve control – as Sport or Race versions.

Which vehicles are Eisenmann systems available for?

Our focus is on BMW and BMW M. We also develop systems for Mercedes-AMG, Mercedes-Benz and Porsche. You’ll find all currently available systems in our online shop.

My car isn’t listed – what now?

Get in touch. Tell us the model, year and engine – we’ll check whether we can develop a system for your car.

How is an Eisenmann exhaust system made?

In four steps in our manufactory in Hemmingen: we digitally measure the available space on the car, design the system in our own CAD, build it by hand – cut, bent and welded – and tune it on the car until the sound is right.

What material are the systems made of?

High-grade stainless steel, selected to suit the temperature load. Depending on the vehicle, the exhaust tips are available in polished stainless steel or black ceramic-coated stainless steel, combined with black anodized aluminum or with carbon fiber.

Which exhaust tip designs are available?

A great many – you choose the ones available for your car directly in our shop configurator. Depending on the system, there are usually two or four tips, round in diameters from about 70 to 120 mm, or oval. Designs include the straight cut (“Signature Design”), the slash cut (“LeMans Design”), the Signature Sidecut Design, and rolled or double-walled tips – each matched to your car’s rear bumper. Depending on the model, finishes include polished stainless steel, black ceramic-coated stainless steel, black anodized aluminum and carbon fiber.

Does Eisenmann also build for tuners and manufacturers?

Yes. We also develop and build exhaust systems for tuners and other manufacturers – from prototype and small series to series production and, on request, throughout the entire life cycle.

How can I reach Eisenmann?

By phone at +49 7150 9574-0 (Mon–Thu 8 am–4 pm, Fri 8 am–2 pm CET), by email at info@sr-eisenmann.de or via our contact form. We usually reply within one business day.

Until the sound
is perfect.

Personal advice: +49 7150 9574-0 · Mon–Thu 8 am–4 pm, Fri 8 am–2 pm (CET)